Nature communications biology, Peer-reviewed journal

During a new study, researchers demonstrated the viability of 3D-printed tissue scaffolds that harmlessly degrade while promoting tissue regeneration following implantation.The findings of the study were published in Nature Communications.The scaffolds showed highly promising tissue-healing performance, including the ability to support cell migration, the 'ingrowth' of tissues, and revascularization (blood vessel growth).Professor Andrew Dove, from the University of Birmingham's School of Chemistry, led the research group and is the lead author on the paper, which characterises the physical properties of the scaffolds, and explains how their 'shape memory' is key to promoting tissue regeneration.Professor Dove commented, "The scaffolds have evenly distributed and interconnected pores that allow diffusion of nutrients from surrounding tissues. The shape memory means this structure is retained when the scaffold is implanted into tissues, and this supports the infiltration of cells into the scaffold while encouraging tissue regeneration and revascularization."The scaffolds were created using 3D printing resin 'inks' developed during a major programme of biomaterials research led by Professor Andrew Dove at the University of Birmingham and Warwick University. The resins are being commercialised under the tradename 4Degra™ by 4D Biomaterials, a spinout from the University of Birmingham Enterprise and Warwick Innovations that was launched in May 2020.The scaffolds showed several major advantages over current approaches used to fill soft tissue voids that remain after trauma or surgery, including sufficient elasticity to conform to irregular spaces, the ability to undergo compression of up to 85 per cent before returning to their original geometry, compatibility with tissues, and non-toxic biodegradation.The paper describes several compositions for the 4Degra™ resins that enable materials of a wide range of strengths to be manufactured. All of the compositions include a photoinitiator and a photoinhibitor to ensure the resins rapidly turn into gel on exposure to light in the visible spectrum to enable their 3D printing into a range of scaffold geometries.The researchers showed that the materials were non-toxic to cells and they also performed mechanical testing to ensure the scaffolds could regain their shape, geometry and pore size after compression, and performed tests that showed the scaffolds can fill an irregularly shaped void in alginate gel which was used as a mimic of soft tissue.Laboratory studies demonstrated that the scaffold degrades by surface erosion into non-acidic products, which means the scaffold structure allows for slow, continuous tissue infiltration.The findings were confirmed in a mouse model that simulates implantation into adipose (fat) tissue. These studies showed infiltration of adipocytes and fibroblasts and vascularisation at two months, and a tissue arrangement and macrophage presence that was indicative of normal tissue restoration rather than damaged, scarred tissue or an inflammatory response.At four months, the researchers found small, mature blood vessels in the surrounding tissue. The scaffolds also demonstrated excellent biocompatibility. The collagen capsule formed around implants was less than 200 mm thick, which is well below the 500 mm threshold used for biocompatibility in other studies, and there was no calcification or necrosis.Also at four months, 80 per cent of the scaffold was still present, demonstrating the slow degradation predicted by the laboratory studies, and indicating the scaffolds would provide support for more than a year, allowing sufficient time for mature tissue ingrowth. The controls, which used poly(L-lactic acid) (PLLA) as a comparator, did not show a significant reduction over the four-month period.Professor Dove commented, "3D printed materials have received a lot of attention in the tissue engineering world. However void-filling materials provide mechanical support, biocompatibility, and surface erosion characteristics that ensure consistent tissue support during the healing process, and this means a fourth dimension (time) needs to be considered in material design.""We have demonstrated that it's possible to produce highly porous scaffolds with shape memory, and our processes and materials will enable the production of self-fitting scaffolds that take on soft tissue void geometry in a minimally invasive surgery without deforming or applying pressure to the surrounding tissues. Over time, the scaffold erodes with minimal swelling, allowing slow continuous tissue infiltration without mechanical degradation," Professor Dove added.4D Biomaterials has made fast progress in scaling up production of the 4Degra™ resin-inks at its laboratory in MediCity, Nottingham (UK) and is now offering technical grade material for commercial supply to 3D printing companies and medical device manufacturers.CEO Phil Smith said, "We are looking to collaborate with innovative companies in Europe and North America to develop a new generation of 3D-printed medical devices that translate the unique advantages of the 4Degra resin-ink platform into improved treatment outcomes for patients".With the first customer shipments dispatched and funding roundabout to close, Phil added "We will be making further announcements shortly."( With inputs from ANI )Disclaimer: This post has been auto-published from an agency feed without any modifications to the text and has not been reviewed by an editor

Nature Communications BiologyFOLLOW

Nature communications biology, Latest News

New York, Aug 12 Researchers have found an important clue to a rare but serious after-effect of Covid-19 ... ...

London, Aug 9 Pre-existing antibodies against human cold coronaviruses (HCoV) can likely confer cross-protection against Covid-19 infection, suggests ... ...

New York, July 31 A team of researchers has leveraged two new molecules, one of which is currently ... ...

Researchers from UCSF have leveraged two new molecules to devise a dual-drug therapy for alcohol use disorder (AUD), without the side effects or complications associated with current treatment regimens. One of those molecules is currently in clinical ...

Researchers recently developed a novel method of gene therapy that can help children born with a rare genetic disorder called AADC deficiency. This deficiency causes severe physical and developmental disabilities. ...

Rare genetic variants carried by one in 3,000 people that have a larger impact on the risk of developing type 2 diabetes than any previously identified genetic effect have been identified by scientists at the University of Cambridge. ...

Researchers at Uppsala University in Sweden have discovered lymph node-like structures close to the tumour in brain cancer patients, where immune cells can be activated to attack the tumour. ...

During a new study, researchers demonstrated the viability of 3D-printed tissue scaffolds that harmlessly degrade while promoting tissue regeneration following implantation. ...